METER / GAUGE SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA


    1. Whenever a meter DTC is detected, the combination meter assembly stores the current vehicle state as Freeze Frame Data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.

    5. According to the GTS display, select a DTC that stored Freeze Frame Data.

    6. Read the freeze frame data recorded when the DTC was stored.

      Combination Meter
      Tester Display Condition Displayed Item
      B1507 Open in Turn Signal Circuit

      • Trip

      • Elapsed time after turning the ignition switch to ON
      B1508 Short in Turn Signal / Hazard Flasher Circuit
      U0100 Lost Communication with ECM / PCM "A"
      U0182 Lost Communication with Lighting Control Module Front