REAR WIPER MOTOR REMOVAL


  1. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. A003HRME01

      Disengage the 3 claws and separate the head cap as shown in the illustration.

    2. Remove the rear wiper arm nut and rear wiper arm and blade assembly.

  2. REMOVE REAR WIPER SHAFT COVER


    1. A003F3L

      Remove the rear wiper shaft cover.

  3. REMOVE REAR NO.1 WIPER LINK PIVOT WASHER


    1. A003H5E

      Using the socket wrench (27 mm), remove the lock nut and rear No.1 wiper link pivot washer.

      Note

      Do not damage the glass.

  4. REMOVE BACK WINDOW GLASS HAMMER ASSEMBLY (w/ Hammer)

    Click here

  5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER


    1. A003FV5E01

      Detach the 6 clips and remove the upper back door trim board assembly.

    2. Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.

  6. REMOVE REAR WIPER MOTOR


    1. A003G2GE01

      Disconnect the connector and remove the clamp.

    2. Remove the 3 bolts and rear wiper motor and grommet as a unit.

    3. A003G0RE01

      Remove the grommet from the rear wiper motor.