AUTOMATIC LIGHT CONTROL SENSOR REMOVAL


  1. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (for LHD)


    1. A003G3SE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, detach the 2 claws and remove the automatic light control sensor.

      Tech Tips

      Protective tape the screwdriver tip before use.

    2. Disconnect the connector.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for RHD)


    1. A003CHTE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the instrument panel finish panel end LH.

    2. Using a moulding remover B, detach the 3 claws and remove the instrument panel finish panel end LH.

    3. Disconnect the connector.

  3. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (for RHD)


    1. A003HTP

      Detach the 2 claws and remove the automatic light control sensor.