PERSONAL LIGHT ASSEMBLY INSPECTION


  1. INSPECT PERSONAL LIGHT ASSEMBLY


    1. A003GZB

      Remove the personal light assembly.

    2. Apply battery voltage to the personal light assembly connector.

    3. Check that the personal light comes on.

      OK
      Measurement condition Switch condition Specified condition

      Battery positive (+) → Terminal 3

      Battery negative (-) → Terminal 1

      		 ON Personal light comes on

      Battery positive (+) → Terminal 3

      Battery negative (-) → Terminal 2

      		 DOOR Personal light comes on

      If the result is not as specified, replace the personal light assembly.