HEADLIGHT ASSEMBLY (for LED Headlight) DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE NO. 1 HEADLIGHT BULB

    A003FGI

    1. Turn the No. 1 headlight bulb in the direction indicated by the arrow to remove it.

      Note

      Do not touch the No. 1 headlight bulb glass.

  2. REMOVE NO. 2 HEADLIGHT COVER LH

    A003HYC

    1. Remove the No. 2 headlight cover LH from the headlight unit LH.

  3. REMOVE FRONT TURN SIGNAL LIGHT SOCKET

    A003GCC

    1. Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow to remove them as a unit.

  4. REMOVE FRONT TURN SIGNAL LIGHT BULB

    A003EYA

    1. Remove the front turn signal light bulb from the front turn signal light socket.

  5. REMOVE CLEARANCE LIGHT BULB

    A003HT0

    1. Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow to disconnect them as a unit.

    2. A003F7O

      Remove the clearance light bulb from the headlight cord.

  6. REMOVE HEADLIGHT LEVELING MOTOR LH

    A003CGO

    1. Detach the claw and rotate the headlight leveling motor LH in the direction of the arrow shown in the illustration.

    2. A003EC3E01
      Text in Illustration
      *1 Aiming Screw

      Turn the aiming screw of the headlight leveling motor LH in the direction of the arrow shown in the illustration and remove the headlight leveling motor LH.

  7. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING

    A003HK7

    1. Remove the headlight leveling motor base packing from the headlight unit LH.

  8. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH

    A003E4V

    1. Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow to disconnect the headlight light control ECU sub-assembly LH.

    2. A003AVK

      Disconnect the connector and remove the headlight light control ECU sub-assembly LH.

  9. REMOVE NO. 1 HEADLIGHT BACK COVER

    A003DJB

    1. Remove the screw.

    2. Detach the guide and remove the No. 1 headlight back cover.

  10. REMOVE HEADLIGHT GASKET

    A003BHH

    1. Remove the headlight gasket from the No. 1 headlight back cover.

  11. REMOVE HEADLIGHT CORD

    A003AY7E01
    Text in Illustration
    *1 Grommet

    1. Disconnect the connector.

    2. Detach the 3 guides.

    3. Disconnect the grommet and remove the headlight cord.