CRUISE CONTROL MAIN SWITCH INSPECTION


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      A003HDBE05
      Text in Illustration
      *a

      Component without harness connected

      (Cruise Control Main Switch)

      		 - -
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 3 +RES 235 to 245 Ω
      1 - 3 -SET 620 to 640 Ω
      1 - 3 CANCEL 1510 to 1570 Ω
      1 - 3 Main switch off 1 MΩ or higher
      1 - 3 Main switch on Below 2.5 Ω

      If the result is not as specified, replace the cruise control main switch.