FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL

    Note

    Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    1. A003FEO

      Push the positions indicated by the arrows in the illustration inward to release the 2 stoppers.

    2. A003E1C

      Pull the glove compartment door assembly in the direction indicated by the arrow shown in the illustration and detach the 2 hinges and remove it.

  3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    1. Separate the clamp from the reinforcement.

    2. A003COAE01

      Disconnect the airbag connector.

    3. A003G3Y

      Remove the 2 bolts from the reinforcement.

    4. A003CQ6

      Separate the clip and clamp, and remove the instrument panel passenger airbag assembly.

  4. REMOVE INSTRUMENT PANEL WIRE NO.3


    1. A003ALW

      Disconnect the connector, and remove the instrument panel wire No.3 from the front passenger airbag assembly.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.