CENTER AIRBAG SENSOR ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL

    CAUTION:

    Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

  2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1


    1. A003DP4

      Using a clip remover, remove the 2 clips

    2. Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.

  3. REMOVE AIR BAG SENSOR ASSEMBLY CENTER


    1. A003B3Y

      Disconnect the airbag connectors, as shown in the illustration.

    2. Remove the 3 bolts and center airbag sensor.