AIR CONDITIONING PANEL REMOVAL


  1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER


    1. A003FBF

      Using a clip remover, remove the 2 clips.

    2. Detach the 4 clips and remove the instrument panel finish lower.

    3. Disconnect each connector.

    4. A003EOU

      Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

  2. REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY


    1. A003DP4

      Using a clip remover, remove the 2 clips

    2. Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.

  3. REMOVE PARKING BRAKE HOLE COVER


    1. A003FEU

      Detach the 6 claws and remove the parking brake hole cover.

    2. Disconnect each connector.

  4. REMOVE SHIFT LEVER KNOB


    1. A003GWUE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Turn the shift lever knob in the direction indicated by the arrow and remove it.

  5. REMOVE SHIFTING HOLE COVER ASSEMBLY


    1. A003G6YE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      for Manual Transmission:

      Detach the 6 claws and remove the shifting hole cover assembly.

    2. for Automatic Transmission:

      Detach the 8 claws and remove the shifting hole cover assembly.

  6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


    1. A003HDQE01
      Text in Illustration
      *A for Manual Transmission
      *B for Automatic Transmission

      Detach the 8 claws and remove the instrument panel finish panel lower center.

  7. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER (AIR CONDITIONING CONTROL ASSEMBLY)


    1. A003F5OE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the instrument cluster finish panel sub-assembly lower center.

    2. Detach the 8 claws and separate the instrument cluster finish panel sub-assembly lower center (air conditioning control assembly).

    3. Disconnect the connector.

    4. A003AKG

      Disconnect the cable from the clamp.

    5. Detach the 2 claws and disconnect the air inlet damper control cable sub-assembly from the No. 2 heater control knob.

    6. A003CLJ

      Detach the 2 claws and disconnect the heater control cable sub-assembly from the heater control knob.

    7. A003GTC

      w/ No. 3 Heater Control Knob:

      Detach the 2 claws and disconnect the air mix damper control cable sub-assembly from the No. 3 heater control knob and remove the instrument cluster finish panel sub-assembly lower center (air conditioning control assembly).