COMPRESSOR (for KD Series Engine) DISASSEMBLY


  1. REMOVE MAGNETIC CLUTCH ASSEMBLY


    1. Place the compressor and magnetic clutch in a vise.

    2. A003F2LE01

      Using SST, hold the magnet clutch hub.

    3. Remove the bolt, magnet clutch hub and magnet clutch washer.

      Tech Tips

      There is no set number of magnet clutch washer since they are used for adjusting.

    4. A003CIR

      Using a snap ring expander, remove the snap ring and magnet clutch rotor.

      Note

      Take care not to damage the seal cover of the bearing when removing the snap ring.

    5. Disconnect the connector.

    6. A003HTH

      Using a snap ring expander, remove the snap ring and magnet clutch stator.