REAR BLOWER RESISTOR (for Cooler) INSPECTION


  1. INSPECT REAR COOLER BLOWER RESISTOR (for Separate Blower Motor Fan Type)


    1. A003FBPE03

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      1 - 4 Always 1.57 to 1.81 Ω
      1 - 2 Always 0.64 to 0.74 Ω
      1 - 3 Always 0.20 to 0.24 Ω

      If the result is not as specified, replace the blower resistor.

  2. INSPECT REAR COOLER BLOWER RESISTOR (for Integrated Blower Motor Fan Type)


    1. A003FBPE03

      Measure the resistance according to the value(s) in the table below.

      Standard resistance (Van)
      Tester Connection Condition Specified Condition
      1 - 4 Always 1.57 to 1.81 Ω
      1 - 2 Always 0.64 to 0.74 Ω
      1 - 3 Always 0.20 to 0.24 Ω
      Standard resistance (Commuter)
      Tester Connection Condition Specified Condition
      1 - 4 Always 1.22 to 1.40 Ω
      1 - 2 Always 0.64 to 0.74 Ω
      1 - 3 Always 0.20 to 0.24 Ω

      If the result is not as specified, replace the blower resistor.