BLOWER UNIT REASSEMBLY


  1. INSTALL FRONT BLOWER MOTOR ASSEMBLY


    1. A003HPK

      Install the front blower motor assembly with the 3 screws.

  2. INSTALL BLOWER RESISTOR


    1. A003FF9

      Install the blower resistor with the 2 screws.

  3. INSTALL CLEAN AIR FILTER


    1. A003HJJ

      Install the clean air filter into the blower unit.

      Note

      Install the clean air filter with its UP marks oriented in the correct direction.

  4. INSTALL AIR FILTER CASE


    1. A003C1W

      Engage the 2 claws to install the air filter case.

  5. INSTALL AIR DUCT SUB-ASSEMBLY


    1. A003E9BE03

      Engage the 2 claws to install the air duct sub-assembly.

  6. INSTALL AIR INLET CONTROL CABLE


    1. A003C1NE02

      Engage the 3 claws to install the air inlet control cable.