AIR CONDITIONING UNIT DISASSEMBLY


  1. REMOVE MODE CONTROL CABLE


    1. A003DD5E01

      Using a screwdriver wrapped with protective tape, release the claw and remove the mode control cable.

  2. REMOVE AIR MIX CONTROL CABLE


    1. A003BZSE01

      Using a screwdriver wrapped with protective tape, release the claw and remove the air mix control cable.

  3. REMOVE INSTRUMENT PANEL REGS CONNECTOR ASSEMBLY CENTER


    1. A003I75E01

      Release the 4 claws and remove the instrument panel regs connector assembly center.

  4. REMOVE QUICK HEATER ASSEMBLY (w/ PTC)


    1. A003BYJ

      Remove the 2 screws and quick heater assembly.

  5. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


    1. A003CS3

      Remove the screw and heater radiator unit sub-assembly.

  6. REMOVE AIR DUCT NO.3


    1. A003BFXE02

      Remove the 2 screws.

    2. Release the 2 claws and remove the air duct No.3.

  7. REMOVE DRAIN COOLER HOSE


    1. A003CAS

      Remove the drain cooler hose.

  8. REMOVE HEATER BRACKET


    1. A003CLW

      Remove the screw and heater bracket.

  9. REMOVE COOLER EXPANSION VALVE


    1. A003C5R

      Using a hexagon wrench 4 mm, remove the 2 hexagon bolts and cooler expansion valve.

  10. REMOVE COOLER EVAPORATOR SUB-ASSEMBLY NO.1


    1. A003HWTE02

      Remove the 4 screws.

    2. Release the 2 claws and remove the heater case lower.

    3. A003BBPE01

      Release the clamp and remove the cooler evaporator sub-assembly.

  11. REMOVE EVAPORATOR TEMPERATURE SENSOR


    1. A003I5UE01

      Remove the evaporator temperature sensor.