VANE PUMP (for 5L-E) DISASSEMBLY


  1. REMOVE POWER STEERING SUCTION PORT UNION


    1. A003EBN

      Remove the bolt and the power steering suction port union.

    2. Using a screwdriver, remove the O-ring from the power steering suction port union.

  2. REMOVE FLOW CONTROL VALVE


    1. A003BIX

      Remove the pressure port union.

    2. Remove the O-ring from the pressure port union.

    3. Remove the flow control valve and the compression spring.

  3. REMOVE REAR VANE PUMP HOUSING


    1. A003BQ5

      Remove the 4 bolts and the rear vane pump housing.

    2. Remove the gasket.

    3. Remove the 2 O-rings from the rear vane pump housing.

  4. REMOVE REAR VANE PUMP SIDE PLATE


    1. Remove the wave washer from the rear vane pump side plate.

    2. A003AMU

      Remove the rear vane pump side plate.

  5. REMOVE VANE PUMP CAM RING


    1. A003AYA

      Remove the vane pump cam ring.

  6. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates.

    2. A003B67

      Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.

    3. Remove the vane pump rotor.

  7. REMOVE VANE PUMP SHAFT

  8. REMOVE VANE PUMP HOUSING OIL SEAL


    1. A003HKWE01

      Using a screwdriver, remove the vane pump housing oil seal.

      Note

      Be careful not to damage the front vane pump housing.