PARKING BRAKE CABLE REMOVAL


  1. REMOVE REAR WHEEL

  2. REMOVE REAR BRAKE DRUM


    1. Release the parking brake lever, and remove the brake drum.

      A003HEME01
      Text in Illustration
      *A for 295 mm Drum *B for 254 mm Drum

      Tech Tips

      If the brake drum cannot be removed easily, perform the following steps.

    2. Remove the hole plug and insert a screwdriver through the hole in the backing plate, and hold the automatic adjusting lever away from the adjuster.

    3. Using another screwdriver, contract the brake shoe adjuster by turning the adjusting wheel.

  3. REMOVE REAR AXLE BRAKE DRUM GASKET

  4. REMOVE AUTOMATIC ADJUST LEVER


    1. for 254 mm drum:


      1. A003CMW

        Remove the automatic adjust lever and the tension spring.

  5. SEPARATE PARKING BRAKE SHOE STRUT SET


    1. for 254 mm drum:


      1. A003B1LE01

        Using SST, remove the upper side tension spring from the brake shoe.

        SST
        09703-30011

    2. for 295 mm drum:


      1. A003CWOE01

        Using SST, remove the upper side tension spring from the brake shoe.

        SST
        09703-30011

  6. REMOVE FRONT BRAKE SHOE


    1. for 254 mm drum:


      1. A003D9P

        Using a needle-nose pliers, remove the anchor side tension spring.

      2. A003E58E01

        Using SST, remove the cup, shoe hold-down sprig and pin.

        SST
        09718-00011
      3. A003F1JE02
        Text in Illustration
        *A LH Side
        *B RH Side

        Remove the parking brake shoe lower strut.

      4. Separate the brake shoe return spring, and remove the front brake shoe.

    2. for 295 mm drum:


      1. A003CTHE01

        Using SST, remove the cup, shoe hold-down sprig and pin.

        SST
        09718-00011

      2. Separate the brake shoe return spring, and remove the front brake shoe.

  7. REMOVE REAR BRAKE SHOE


    1. for 254 mm drum:


      1. A003D7FE01

        Using SST, remove the cup, shoe hold-down sprig and pin.

        SST
        09718-00011
      2. A003EMZ

        Disconnect the parking brake cable No. 3 and remove the rear brake shoe.

    2. for 295 mm drum:


      1. A003GYTE01

        Using SST, remove the cup, shoe hold-down sprig and pin.

        SST
        09718-00011

      2. Remove the tension spring.

      3. A003AYI

        Disconnect the parking brake cable No. 3 and remove the rear brake shoe.

  8. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3 (NARROW BODY)


    1. A003BY7

      Remove the 2 bolts and separate the parking brake cable assembly No.3 from the backing plate.

    2. Remove the 5 bolts, nut and parking brake cable assembly No.3.

      A003I6L

    3. Remove the parking brake cable assembly No.3 from the parking brake equalizer.

  9. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3 (WIDE BODY)


    1. A003BY7

      Remove the 2 bolts and separate the parking brake cable assembly No.3 from the backing plate.

    2. Remove the 6 bolts, nut and parking brake cable assembly No.3.

      A003C0Y

    3. Remove the parking brake cable assembly No.3 from the parking brake equalizer.