PARKING BRAKE LEVER REASSEMBLY


  1. INSTALL PARKING BRAKE PLUNGER ASSEMBLY


    1. Apply MP grease to 2 new parking brake pawls and 2 pins.

    2. Install the 2 parking brake pawls and springs to the parking brake plunger guide.

    3. Install the 2 parking brake pawl pins.

    4. A003G02

      Holding one side of the parking brake pawl pin with a metal block, tap the other side with a hammer to stake it.

      Note

      Do not damage the plunger guide.

    5. A003DHU

      Using a screwdriver, install a new parking brake bush to the parking brake plunger guide.

      Note

      Do not damage the plunger guide.

      Tech Tips

      Tape up the screwdriver tip before use.

    6. A003CTGE01

      Move the 2 parking brake pawls (A) to release the lock, and push in the parking brake plunger assembly (B) as shown in the illustration.

    7. A003H25E01

      Install a new parking brake plunger anti-rattle to the parking brake plunger assembly.

    8. A003H55E01

      Using a hammer, install the parking brake plunger pin in the position shown in the illustration.

      Note

      Install the plunger pin parallel to the parking brake switch bracket.

  2. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.1


    1. A003AX9

      Install the parking brake cable assembly No.1 to the bracket.

    2. A003ETWE01

      Move the parking brake pawl (A) to release the lock, and push in the parking brake plunger assembly as shown in the illustration (B).

    3. A003BZCE01

      Connect the parking brake cable assembly No.1 to the parking brake plunger assembly.

    4. Install the bracket to the parking brake plunger guide.

    5. A003CS0E01

      Apply MP grease to the parking brake wire pawl pin.

    6. Push the parking brake wire pulley as shown in the illustration, install the parking brake wire pawl pin.

    7. A003C2R

      Install the clip to the parking brake wire pawl pin.

    8. A003CUC

      Install the clip.

    9. A003GBLE01

      Install the parking brake switch.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }
    10. A003E0M

      Install the parking brake plunger protector.