REAR SPEED SENSOR INSTALLATION

INSTALL REAR SPEED SENSOR RH

1. Install the rear speed sensor RH with the bolt.

   Torque:

   8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

   Note

   Prevent foreign matter from attaching to the sensor tip.

2. Install the 2 harness clamps with the 2 bolts.

   Torque:

   8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

3. Attach the 3 clips.

4. Connect the connector.

INSTALL REAR SPEED SENSOR LH

1. Install the rear speed sensor LH with the bolt.

   Torque:

   8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

   Note

   Prevent foreign matter from attaching to the sensor tip.

2. Attach the 3 clips.

3. Connect the connector and attach the connector clamp.

INSTALL REAR WHEEL

Torque:

100 N*m  { 1020 kgf*cm, 74 ft.*lbf }

CHECK SPEED SENSOR SIGNAL