SHIFT AND SELECT LEVER SHAFT ASSEMBLY REASSEMBLY


  1. INSTALL SHIFT LEVER SHAFT OIL SEAL


    1. A003EO2E01

      Using SST and a hammer, install a new oil seal until its surface is flush with the housing end surface.

      SST
      09550-10012   ( 09252-10010 )

    2. Apply MP grease to the oil seal lip.

  2. INSTALL SHIFT LEVER NO.2 SHAFT OIL SEAL


    1. A003CN8E01

      Using SST and a hammer, install a new oil seal until its surface is flush with the housing end surface.

      SST
      09550-10012   ( 09252-10010 )

    2. Apply MP grease to the oil seal lip.

  3. INSTALL REVERSE RESTRICT PIN NO.1


    1. A003DUX

      Coat the reverse restrict pin No.1 with gear oil.

    2. Install the spring to the reverse restrict pin No.1.

    3. Install the reverse restrict pin No.1 and spring to the shift lever shaft housing.

  4. INSTALL REVERSE RESTRICT PIN SLOTTED SPRING PIN


    1. A003EK5

      Using a pin punch (5 mm) and a hammer, install the slotted spring pin to the shift lever shaft housing.

  5. INSTALL SELECT SPRING SEAT NO.1


    1. A003E7F

      Coat the select spring seat No.1 with gear oil.

    2. Install the select spring seat No.1 and spring to the shift lever shaft housing.

  6. INSTALL SHIFT AND SELECT LEVER SHAFT


    1. A003ICY

      Coat the shift and select lever shaft with gear oil.

    2. Install the shift and select lever shaft to the shift lever shaft housing.

  7. INSTALL SHIFT LEVER SHAFT SET SLOTTED SPRING PIN


    1. A003GPD

      Using a pin punch (5 mm) and a hammer, install the shift lever shaft set slotted pin to the shift and select lever shaft.

  8. INSTALL SHIFT LEVER BOOT


    1. A003BO3

      Install the shift lever boot to the shift lever shaft housing.

  9. INSTALL SHIFT OUTER LEVER NO.1


    1. A003FL5

      Install the shift outer lever No.1 to the shift and select lever shaft.

  10. INSTALL SHIFT OUTER LEVER LOCK PIN


    1. A003HGG

      Install the shift outer lever lock pin to the shift outer lever No.1 with the nut.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  11. INSTALL SELECT LEVER SHAFT SUB-ASSEMBLY


    1. A003F72

      Coat the select lever shaft with gear oil, and install it to the shift lever shaft housing.

  12. INSTALL SELECT OUTER LEVER


    1. A003EW5

      Install the select outer lever and washer to the select lever shaft.

  13. INSTALL LEVER LOCK PIN NO.2


    1. A003FJT

      Install the shift lever lock pin No.2 to the select outer lever with the nut.

      Torque:
      8.0 N*m  { 80 kgf*cm, 71 in.*lbf }