INPUT SHAFT REASSEMBLY


  1. INSTALL INPUT SHAFT FRONT BEARING


    1. A003GIY

      Using SST and a press, press in a new input shaft front bearing.

      SST
      09316-60011   ( 09316-00031 )
    2. A003HU8

      Select a snap ring that will allow minimum amount of axial play.

      Standard clearance
      0.1 mm (0.0039 in.) or less
      Front bearing shaft snap ring thickness
      Mark Thickness: mm (in.)
      0 2.05 to 2.10 (0.0807 to 0.0827)
      1 2.10 to 2.15 (0.0827 to 0.0847)
      2 2.15 to 2.20 (0.0847 to 0.0866)
      3 2.20 to 2.25 (0.0866 to 0.0886)
      4 2.25 to 2.30 (0.0886 to 0.0906)
      5 2.30 to 2.35 (0.0906 to 0.0925)
    3. A003D3C

      Using a snap ring expander, install the snap ring.

  2. INSTALL INPUT SHAFT BEARING


    1. A003AOL

      Coat the 13 input shaft bearings with MP grease, install them to the input shaft.

  3. INSTALL SYNCHRONIZER RING NO.2


    1. A003AW5

      Coat the synchronizer ring No.2 with gear oil, and install it to the input shaft.