SECOND COAST BRAKE REASSEMBLY


  1. INSTALL 2ND COAST BRAKE PISTON


    1. A003I0D

      There are 2 different lengths for the piston rod.

      Piston rod length:
      Number of grooves Thickness mm (in.)
      0 78.40 (3.087)
      1 79.90 (3.146)

      When the piston rod stroke is outside the standard value even if the brake band works normally, replace the rod with a new one.

    2. A003FHXE01

      Install the retainer, the spring and the piston to the piston rod.

    3. A003AGP

      Firmly hold down the piston, then compress the compression spring.

    4. Using needle-nose pliers, install the E-ring.

  2. INSTALL 2ND COAST BRAKE PISTON OIL SEAL RING


    1. A003AX7

      Coat the oil seal ring with ATF.

    2. Squeeze the ends of the oil seal ring together with the wrap distance 8 mm (0.31 in.) or less, and then install them to the starter shaft groove.

      Note

      Do not over-spread the ring ends.