REAR PLANETARY GEAR DISASSEMBLY


  1. REMOVE REAR PLANETARY GEAR ASSEMBLY


    1. A003CPA

      Remove the output shaft from the rear planetary gear.

  2. REMOVE PLANETARY OUTPUT SHAFT OIL SEAL RING


    1. A003ERJ

      Remove the oil seal ring from the output shaft.

  3. REMOVE REAR PLANETARY RING GEAR


    1. A003F1A

      Remove the rear planetary gear from the rear planetary ring gear.

  4. INSPECT ONE WAY CLUTCH NO.2


    1. A003C1TE02

      Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locked clockwise.

  5. REMOVE ONE WAY CLUTCH NO.2


    1. A003C6T

      Remove the one-way clutch inner race from the rear planetary gear.

    2. A003I90

      Using a screwdriver, remove the snap ring.

    3. A003CR6

      Remove the No.2 one-way clutch with the retainers from rear planetary gear.

  6. REMOVE PLANETARY CARRIER THRUST WASHER NO.2


    1. A003HZF

      Remove the thrust washer No.2 from the rear planetary gear.

  7. REMOVE PLANETARY CARRIER THRUST WASHER NO.1


    1. A003B1S

      Remove the thrust washer No.1 from the rear planetary gear.

  8. REMOVE REAR PLANETARY FLANGE THRUST NEEDLE ROLLER BEARING


    1. A003HB0

      Remove the 2 races and the bearing from the rear planetary ring gear.

  9. REMOVE REAR PLANETARY RING GEAR FLANGE


    1. A003BSD

      Using a screwdriver, remove the snap ring.

    2. A003E2R

      Remove the ring gear flange.

  10. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE


    1. A003BWN

      Using a feeler gauge, measure the planetary pinion gear thrust clearance.

      Standard clearance
      0.20 to 0.60 mm (0.0079 to 0.0236 in.)
      Maximum clearance
      0.65 mm (0.0256 in.)

      If the clearance is greater than the maximum, replace the planetary gear assembly.