BATTERY CURRENT SENSOR (w/ Dual VVT-i) ON-VEHICLE INSPECTION


  1. INSPECT BATTERY CURRENT SENSOR ASSEMBLY


    1. A003BUKE03
      Text in Illustration
      *a

      Component without harness connected

      (Battery Current Sensor Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (VC5) - 4 (E2) Always 0.1 to 10 kΩ
      2 (VC5) - 3 (IB) 0.5 kΩ or less
      3 (IB) - 4 (E2) 0.05 to 10 kΩ

      If the result is not as specified, replace the battery current sensor assembly.

    2. A003HDKE01
      Text in Illustration
      *a

      Component without harness connected

      (Battery Current Sensor Assembly)
      *b Resistance
      *c Temperature

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (THB) - 4 (E2) 20 to 30°C 1.5 to 2.5 kΩ

      If the result is not as specified, replace the battery current sensor assembly.