STARTER (for 1.7 kW Type) REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE STARTER ASSEMBLY


    1. A003G1W

      Remove the 2 bolts, then disconnect the ground cable and wiring harness clamp bracket.

    2. A003EOQ

      Open the terminal cap.

    3. Disconnect the starter connector.

    4. Remove the nut and disconnect the starter wire.

    5. A003AS9

      Remove the 2 bolts and starter assembly.