STARTER REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY


    1. A003G8M

      Remove the transmission oil level gauge sub-assembly.

  4. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY

    A003I8V

    1. Remove the 2 bolts and transmission oil filler tube sub-assembly.

    2. Remove the O-ring from the transmission oil filler tube sub-assembly.

  5. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A003FKY

      Remove the nut and disconnect the transmission control cable assembly from the transmission control shaft lever LH.

    2. Remove the clip and disconnect the transmission control cable assembly from the transmission control cable bracket.

  6. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET


    1. A003ERX

      Remove the 2 bolts and transmission control cable bracket from the automatic transmission assembly.

  7. REMOVE STARTER ASSEMBLY


    1. Detach the wire harness clamp from the wire harness bracket.

    2. A003F81

      Remove the bolt and wire harness bracket.

    3. Remove the bolt and disconnect the wire harness.

    4. Disconnect the starter connector.

    5. Remove the terminal cap.

    6. Remove the nut and disconnect the wire harness.

    7. A003B42

      Remove the 2 bolts and starter assembly.