IGNITION SWITCH INSPECTION


  1. INSPECT IGNITION SWITCH


    1. A003CSSE01

      Measure the resistance of the switch.

      Standard resistance
      Switch Condition Tester Connection Specified Condition
      LOCK Between all terminals 10 kΩ or higher
      ACC 2 (AM1) - 3 (ACC) Below 1 Ω
      ON

      2 (AM1) - 3 (ACC)

      2 (AM1) - 4 (IG1)

      5 (IG2) - 6 (AM2)

      		 Below 1 Ω
      START

      1 (ST1) - 2 (AM1)

      1 (ST1) - 4 (IG1)

      5 (IG2) - 6 (AM2)

      5 (IG2) - 7 (ST2)

      		 Below 1 Ω

      If the result is not as specified, replace the ignition switch.