GLOW PLUG REMOVAL

CAUTION:

Make sure to wear protective gloves when performing work to avoid burns.


  1. WARM UP ENGINE

    Note

    To protect the glow plug assembly from damage, before removing the glow plug assembly, make sure to warm up the engine.

  2. REMOVE COMMON RAIL ASSEMBLY

    Click here

  3. REMOVE NO. 1 GLOW PLUG CONNECTOR

    CAUTION:

    Make sure to wear protective gloves when performing work to avoid burns.


    1. A003E7M

      Using an E8 "TORX" socket wrench, remove the stud bolt from the intake manifold.

    2. A003B9I

      Remove the 4 glow plug screw grommets.

    3. A003HUJ

      Remove the 4 nuts and No. 1 glow plug connector.

  4. REMOVE GLOW PLUG ASSEMBLY

    CAUTION:

    Make sure to wear protective gloves when performing work to avoid burns.


    1. A003D9K

      Using a 10 mm deep socket wrench, remove the 4 glow plug assemblies.