STARTER (for 2.7 kW Type) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A003CCGE03

      Remove the nut and disconnect the transmission control cable assembly from the transmission control shaft lever assembly.

    2. Remove the clip and disconnect the transmission control cable assembly from the No. 1 transmission control cable bracket.

  3. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET


    1. A003I4O

      Remove the 2 bolts and the No. 1 transmission control cable bracket from the automatic transmission housing.

  4. REMOVE STARTER ASSEMBLY


    1. A003CHWE01

      for Wide Body:

      Remove the bolt, then disconnect the ground cable.

    2. A003EM1E01

      Open the terminal cap.

    3. Remove the nut and disconnect the wire harness from terminal 30.

    4. Disconnect the terminal 50 connector from the starter.

    5. A003BMK

      for Automatic Transmission:

      Remove the bolt and 2 nuts, then remove the starter.

    6. A003EPK

      for Manual Transmission:

      Remove the bolt and nut, then remove the starter.