STARTER INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. Install the starter assembly and wire harness bracket with the 2 bolts and nut.

      Torque:
      68 N*m  { 693 kgf*cm, 50 ft.*lbf }

    2. Connect the starter wire with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Connect the starter connector.

    4. Close the terminal cap.

  2. INSTALL NO. 2 ENGINE UNDER COVER


    1. Install the No. 2 engine under cover with the 6 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.