BACK DOOR OUTSIDE GARNISH REMOVAL


  1. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle)


    1. A003B54

      Remove the screw and the back door inside handle assembly.

  2. REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle)

    A003FHWE02
    Text in Illustration
    *A w/o Illumination
    *B w/ Illumination

    1. w/o Illumination:


      1. Remove the 2 screws and the back door inside handle bezel.

    2. w/ Illumination:


      1. Remove the 2 screws and the back door inside handle bezel.

      2. Disconnect the connector.

  3. REMOVE BACK DOOR PULL STRAP (w/ Strap)


    1. A003CXA

      Remove the screw and back door pull strap.

  4. REMOVE BACK DOOR TRIM BOARD (for Board)


    1. A003FKJ

      Using a clip remover, remove the 16 clips and the back door trim board.

  5. REMOVE BACK DOOR TRIM BOARD (for Molded Door Trim)


    1. A003I4B

      Remove the 2 screws.

    2. Using a clip remover, remove the 18 clips and the back door trim board.

  6. REMOVE BACK DOOR OUTSIDE GARNISH


    1. w/ Smart Entry and Start System:


      1. Disconnect the 2 connectors.

    2. w/o Smart Entry and Start System:


      1. Disconnect the connector.

    3. A003EJW

      Remove the 5 nuts.

    4. Detach the 2 clips and remove the back door outside garnish.

    5. A003G1A

      Remove the grommet.

  7. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. w/ Smart Entry and Start System:

      Click here

    2. w/o Smart Entry and Start System:

      Click here

  8. REMOVE DOOR ELECTRICAL KEY SWITCH COVER (w/ Smart Entry and Start System)


    1. Remove the door electrical key switch cover.