POWER SLIDE DOOR CONTROL SWITCH INSPECTION

INSPECT AUTO SLIDE DOOR CONTROL SWITCH ASSEMBLY (for RH Side)

1. 

   Text in Illustration

   *a	Component without harness connected (Auto Slide Door Control Switch Assembly (for RH Side))

   Check the resistance.

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 8 - 1 Switch ON Below 1 Ω 8 - 1 Switch OFF 10 kΩ or higher

      If the result is not as specified, replace the auto slide door control switch assembly.

2. Check the illumination operation.

   
   

   1. Apply battery voltage to the auto slide door control switch assembly and check that the illumination comes on.

      Standard
      Measurement Condition Specified Condition Battery positive (+) → Terminal 7 Battery negative (-) → Terminal 6 LED illuminates

      If the result is not as specified, replace the auto slide door control switch assembly.

INSPECT AUTO SLIDE DOOR CONTROL SWITCH ASSEMBLY (for LH Side)

1. 

   Text in Illustration

   *a	Component without harness connected (Auto Slide Door Control Switch Assembly (for LH Side))

   Check the resistance.

   
   

   1. Measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 4 - 1 Switch ON Below 1 Ω 4 - 1 Switch OFF 10 kΩ or higher

      If the result is not as specified, replace the auto slide door control switch assembly.

2. Check the illumination operation.

   
   

   1. Apply battery voltage to the auto slide door control switch assembly and check that the illumination comes on.

      Standard
      Measurement Condition Specified Condition Battery positive (+) → Terminal 3 Battery negative (-) → Terminal 2 LED illuminates

      If the result is not as specified, replace the auto slide door control switch assembly.