SLIDE DOOR (w/ Power Slide Door) DISASSEMBLY


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE SLIDE DOOR WINDOW GARNISH LH


    1. A003GFE

      Disengage the 4 clips and remove the slide door window garnish.

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A003DV1

      Using "TORX" socket wrench T25, remove the 2 screws.

    2. A003EWN

      Disengage the claw and 19 clips, and remove the rear door trim board.

  4. REMOVE REAR DOOR SCUFF PLATE LH


    1. A003C68

      Disengage the claw and 12 clips.

    2. Disconnect the connector and remove the rear door scuff plate.

  5. REMOVE SIDE STEP REAR SUPPORT LH

    A003I70

    1. Remove the 3 bolts and the side step rear support.

  6. REMOVE DOOR CONTROL RELAY ASSEMBLY

    A003GIX

    1. Disconnect the connectors.

    2. Remove the bolt and the door control relay.

  7. REMOVE REAR NO. 2 DOOR WIRE


    1. A003EH0

      Remove the bolt.

    2. A003CD3

      Disconnect the connector from the vehicle.

    3. A003ALV

      Remove the 4 bolts, and then disengage the 4 clips.

    4. Disconnect the connector of the door, and remove the rear No. 2 door wire.

      Note

      Do not put anything on the rear No. 2 door wire after removal.

  8. REMOVE SLIDE DOOR SERVICE HOLE COVER LH


    1. A003BGZ

      Disengage the clamp.

    2. Disconnect the cable from the slide door lock remote control.

    3. Remove the slide door service hole cover.

  9. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSEMBLY LH


    1. A003DX2

      Disconnect the 2 links.

    2. Remove the 2 bolts and the rear door inside handle.

  10. REMOVE REAR DOOR OUTSIDE HANDLE ASSEMBLY LH


    1. A003ENV

      Disconnect the 2 links.

    2. Remove the 2 bolts and the rear door outside handle.

  11. REMOVE REAR DOOR LOCK CHILD PROTECTION COVER LH


    1. for Clip Type:


      1. A003BB4

        Remove the clip and the rear door lock child protection cover.

    2. for Tape Type:


      1. A003I6E

        Remove the rear door lock child protection cover.

  12. REMOVE SLIDE DOOR FRONT LOCK ASSEMBLY LH

    A003D2V

    1. Disconnect the cable.

    2. Using "TORX" socket wrench T30, remove the 3 screws and the slide door front lock.

  13. REMOVE POWER SLIDE DOOR TOUCH SENSOR

    A003DY6

    1. Disconnect the connector.

    2. Using "TORX" socket wrench T25, remove the 6 screws.

    3. Remove the 3 bolts.

    4. Disengage the 2 clips and the power slide door touch sensor.

  14. REMOVE SLIDE DOOR DOWN FEMALE STOPPER

    A003D7V

    1. Remove the bolt and the slide door down female stop.

  15. REMOVE SLIDE DOOR FULL OPEN STOP LOCK ASSEMBLY LH


    1. Disengage the clamp.

    2. A003C4F

      Remove the 2 bolts and the slide door full open stop lock assembly.

  16. REMOVE DOOR OPENING RELAY

    A003AW1

    1. Disconnect the connector.

    2. Remove the bolt and the door opening relay.

  17. REMOVE POWER SLIDE DOOR LOCK ASSEMBLY LH


    1. A003CD8

      Disconnect the cable.

    2. Disengage the clamps and remove the bolt.

    3. Using "TORX" socket wrench T30, remove the 3 screws and the power slide door lock.

  18. REMOVE SLIDE DOOR LOCK RELEASE MOTOR

    A003F2N

    1. Disconnect the connector.

    2. Disconnect the link.

    3. Remove the 3 bolts and the slide door lock release motor.

  19. REMOVE SLIDE DOOR LOCK REMOTE CONTROL ASSEMBLY LH

    A003FYR

    1. Disconnect the connector.

    2. Remove the 5 bolts and the slide door lock remote control.

  20. REMOVE SLIDE DOOR WIRE

    A003C7P

    1. Remove the bolt.

    2. Disengage the clamps, and remove the slide door wire.

  21. REMOVE POWER SLIDE DOOR MOTOR ASSEMBLY


    1. A003CZE

      Remove the 2 bolts.

    2. A003I66

      Remove the bolt and the slide door lower rail plate.

    3. Remove the slide door lower roller assembly LH from the belt bracket of the power slide door motor assembly.

    4. A003H8J

      Remove the 2 grommets.

    5. A003FP4

      Remove the 10 bolts and the power slide door motor.

  22. REMOVE SLIDE RAIL END MOULDING LH

    A003CDQE01

    1. Pull the end moulding toward rear of the vehicle and pull it toward you, and disengage the clip (portion a) to remove the slide rail end moulding LH.

      Note

      If the clip (portion a) can't be removed, apply protective tape around the slide rail end moulding, disengage the clip by pushing it toward the rear of the vehicle using a screwdriver with its tip wrapped in protective tape and remove the slide rail end moulding.

  23. REMOVE SLIDE DOOR UPPER RAIL CUSHION LH


    1. A003CDH

      Remove the bolt and the slide door upper rail cushion.

  24. REMOVE SLIDE DOOR SUB-ASSEMBLY LH


    1. A003BIG

      Remove the slide door roller assembly lower base from the cut area on the slide door rail lower.

    2. A003DF3

      Remove the slide door roller assembly upper base from the cut area on the slide door rail upper.

    3. A003HV0

      Slide the door toward the rear of the vehicle, remove the slide door hinge center base from the slide door rail center, and remove the slide door.

  25. REMOVE SLIDE DOOR ROLLER ASSEMBLY LH


    1. Remove the 2 bolts and the slide door roller.

  26. REMOVE SLIDE DOOR CENTER HINGE ASSEMBLY LH


    1. Remove the 2 bolts and the slide door center hinge.

  27. REMOVE SLIDE DOOR LOWER ROLLER ASSEMBLY LH


    1. Remove the 4 bolts and the slide door lower roller.