POWER SLIDE DOOR MAIN SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL


    1. A003FBF

      Using a clip remover, remove the 2 clips.

    2. Detach the 4 clips and remove the instrument panel finish lower.

    3. Disconnect each connector.

    4. A003EOU

      Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

  2. REMOVE PARKING BRAKE HOLE COVER


    1. A003FEU

      Detach the 6 claws and remove the parking brake hole cover.

    2. Disconnect each connector.

  3. REMOVE POWER SLIDE DOOR MAIN SWITCH


    1. A003G0M

      Detach the 2 claws and remove the power slide door main switch.