SLIDE DOOR (w/o Power Slide Door) DISASSEMBLY


  1. REMOVE DOOR LOCK CONTROL KNOB BEZEL (w/o Auto Closer)


    1. A003C41E01

      Using a "torx" socket wrench (T25), remove the 2 "torx" screws.

    2. Disengage the 2 claws and remove the door control knob bezel.

  2. REMOVE SLIDE DOOR WINDOW GARNISH (w/ Auto Closer)


    1. A003F5EE01

      Disengage the 4 clips and remove the slide door window garnish.

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY (w/o Auto Closer)


    1. A003D2T

      Using a clip remover, remove the 20 clips and the rear door trim board sub-assembly.

  4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY (w/ Auto Closer)


    1. A003CRZ

      Using a "torx" socket wrench (T25), remove the 2 "torx" screws.

    2. A003G12E01

      Disengage the 19 clips and claw and remove the rear door trim board sub-assembly.

  5. REMOVE SLIDE DOOR SERVICE HOLE NO.1 COVER


    1. A003E44E01

      Disengage the clamp.

    2. Disconnect the cable from the slide door lock remote control assembly.

    3. Remove the slide door service hole No.1 cover.

  6. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSEMBLY


    1. A003FPX

      Disconnect the 2 links.

    2. Remove the 2 bolts and the rear door inside handle sub-assembly.

  7. REMOVE REAR DOOR OUTSIDE HANDLE ASSEMBLY


    1. A003FJK

      Disconnect the link.

    2. Remove the bolt and the slide door lock cylinder assembly.

    3. A003AVE

      Disconnect the link.

    4. Remove the bolt and the rear door outside handle assembly.

  8. REMOVE REAR DOOR LOCK CHILD PROTECTION COVER (w/ Cover)


    1. for Clip Type:


      1. A003BB4

        Remove the clip and the rear door lock child protection cover.

    2. for Tape Type:


      1. A003I6E

        Remove the rear door lock child protection cover.

  9. REMOVE REAR DOOR OPEN CONTROL LINK ASSEMBLY (w/o Cover)


    1. A003H9Z

      Disconnect the link.

    2. Remove the clip and the rear door open control link assembly.

  10. REMOVE SLIDE DOOR LOCK ASSEMBLY FRONT


    1. A003I6KE01

      Disconnect the cable.

    2. Using a "torx" socket wrench (T30), remove the 3 "torx" screws and the slide door lock assembly front.

  11. REMOVE SLIDE DOOR CONTROL JUNCTION FEMALE


    1. Disconnect the connector.

    2. A003GLZE01

      Remove the 2 bolts and the slide door control junction female.

  12. REMOVE SLIDE DOOR DOWN FEMALE STOP


    1. A003EY2

      Remove the 2 bolts and the slide door down female stop.

  13. REMOVE SLIDE DOOR FULL OPEN STOP LOCK ASSEMBLY


    1. Disengage the clamp.

    2. A003HKCE01

      Remove the 2 bolts and the slide door full open stop lock assembly.

  14. REMOVE SLIDE DOOR CLOSER RELAY (w/ Auto Closer)


    1. Disconnect the connector.

    2. A003ESH

      Remove the bolt and the slide door closer relay.

  15. REMOVE REAR DOOR LOCK ASSEMBLY (w/ Auto Closer)


    1. A003DHVE01

      Disconnect the cable.

    2. Disengage the clamp.

    3. Using a "torx" socket wrench (T30), remove the 3 "torx" screws and the rear door lock assembly.

  16. REMOVE POWER SLIDE DOOR LOCK ASSEMBLY (w/ Auto Closer)


    1. A003D3BE01

      Disconnect the cable.

    2. Disengage the clamps and remove the bolt.

    3. Using a "torx" socket wrench (T30), remove the 3 "torx" screws and the power slide door lock assembly.

  17. REMOVE SLIDE DOOR LOCK REMOTE CONTROL ASSEMBLY


    1. Disconnect the connector.

    2. A003BAQ

      Remove the 5 bolts and the slide door lock remote control assembly.

  18. REMOVE REAR DOOR SCUFF PLATE


    1. A003EH5

      Disengage the 11 clips and remove the rear door scuff plate.

  19. REMOVE SLIDE RAIL END MOULDING


    1. Pull on the end moulding while sliding it toward the rear of the vehicle. Disengage the clip to remove the slide rail end moulding.

      A003BZNE01

  20. REMOVE SLIDE DOOR UPPER RAIL CUSHION


    1. A003GHN

      Remove the bolt and the slide door upper rail cushion.

  21. REMOVE SLIDE DOOR LOWER RAIL PLATE


    1. A003GCF

      Remove the bolt and the slide door lower rail plate.

  22. REMOVE SLIDE DOOR SUB-ASSEMBLY


    1. Remove the slide door roller assembly lower base from the notch on the slide door rail lower.

    2. Remove the slide door roller assembly upper base from the notch on the slide door rail upper.

    3. Slide the door toward the rear of the vehicle, remove the slide door hinge center base from the slide door rail center, and remove the slide door.

  23. REMOVE SLIDE DOOR ROLLER ASSEMBLY UPPER


    1. Remove the 2 bolts and the slide door roller assembly upper.

  24. REMOVE SLIDE DOOR HINGE ASSEMBLY CENTER


    1. Remove the 2 bolts and the slide door hinge assembly center.

  25. REMOVE SLIDE DOOR ROLLER ASSEMBLY LOWER


    1. Remove the 4 bolts and the slide door roller assembly lower.