REAR NO. 3 SEAT ASSEMBLY (for Bench Type Seatback) REASSEMBLY


  1. INSTALL REAR SEATBACK LOCK ASSEMBLY LH (for Fold Down Type Seat, 3-seater Type)


    1. A003ICPE01
      Text in Illustration
      *1 Clamp
      *2 Cable Clamp

      Install the rear seatback lock assembly LH with the 2 bolts.

      Torque:
      33 N*m  { 337 kgf*cm, 24 ft.*lbf }

    2. Install a new clamp as shown in the illustration.

    3. Connect the cable end to the No. 3 seatback spring assembly RH.

    4. Attach the 2 cable clamps to the No. 3 seatback spring assembly RH.

  2. INSTALL REAR SEATBACK LOCK ASSEMBLY RH (for Fold Down Type Seat, 4-seater Type)

    Tech Tips

    Use the same procedure described 3-seater Type RH side.

  3. INSTALL REAR SEATBACK LOCK COVER RH (for Fold Down Type Seat, 3-seater Type)


    1. Attach the guide and install the rear seatback lock cover RH with the 2 screws.

  4. INSTALL REAR SEATBACK LOCK COVER LH (for Fold Down Type Seat, 4-seater Type)

    Tech Tips

    Use the same procedure described 3-seater Type RH side.

  5. INSTALL NO. 3 SEATBACK PAD RH (for Fold Down Type Seat, 3-seater Type)


    1. Install the No. 3 seatback pad RH to the No. 3 seatback spring assembly RH.

  6. INSTALL NO. 3 SEATBACK PAD LH (for Fold Down Type Seat, 4-seater Type)

    Tech Tips

    Use the same procedure described 3-seater Type RH side.

  7. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY RH (for Fold Down Type Seat, 3-seater Type)


    1. A003HMFE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the No. 3 seatback cover sub-assembly RH to the No. 3 seatback pad RH with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A003G0A

      Close the fastener of the No. 3 seatback cover sub-assembly RH.

  8. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH (for Fold Down Type Seat, 4-seater Type)

    Tech Tips

    Use the same procedure described 3-seater Type RH side.

  9. INSTALL REAR SEATBACK LOCK CONTROL BEZEL (for Fold Down Type Seat)


    1. Attach the guide and install the rear seatback lock control bezel with the screw.

  10. INSTALL RECLINING REMOTE CONTROL LEVER KNOB (for Fold Down Type Seat)


    1. Install the reclining remote control lever knob with the screw.

  11. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH (for Fold Down Type Seat, 3-seater Type)


    1. A003HA4E01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the No. 3 seatback cover sub-assembly LH to the No. 3 seatback pad LH with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A003C61

      Close the fastener of the No. 3 seatback cover sub-assembly LH.

  12. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY RH (for Fold Down Type Seat, 4-seater Type)


    1. Using hog ring pliers, install the No. 3 seatback cover sub-assembly RH to the No. 3 seatback pad RH with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

      A003CZ5E01
      Text in Illustration
      *1 Hog Ring Pliers - -
    2. A003DGQ

      Close the fastener of the No. 3 seatback cover sub-assembly RH.

  13. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY (for Fixed Type Seat)


    1. Using hog ring pliers, install the No. 3 seatback cover sub-assembly to the No. 3 seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

      A003CZ5E01
      Text in Illustration
      *1 Hog Ring Pliers - -
    2. A003DGQ

      Close the fastener of the No. 3 seatback cover sub-assembly.

  14. INSTALL ASSIST GRIP


    1. Install the assist grip with the 2 screws.

      Tech Tips

      Use the same procedure for all assist grips.

  15. INSTALL ASSIST GRIP PLUG


    1. Attach the 2 claws to install the assist grip plug.

      Tech Tips

      Use the same procedure for all assist grip plugs.

  16. INSTALL NO. 3 SEAT LEG SUB-ASSEMBLY


    1. Install the No. 3 seat leg sub-assembly with the 4 bolts.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

    2. for Fold Down Type Seat, 3-seater Type:

      Install the No. 3 seatback assembly RH.


      1. A003AUM

        Install the bush to the No. 3 seatback assembly RH.

      2. A003F5M

        Attach the 3 claws to install the bush to the No. 3 seat leg sub-assembly.

      3. Install the No. 3 seatback assembly RH with the bolt.

        Torque:
        29 N*m  { 296 kgf*cm, 21 ft.*lbf }
      4. A003BH0

        Install a new E-ring to the No. 3 seat leg sub-assembly.

    3. for Fold Down Type Seat, 4-seater Type:

      Install the No. 3 seatback assembly LH.

      Tech Tips

      Use the same procedure described 3-seater Type RH side.

  17. INSTALL NO. 2 SEAT LEG COVER (for Fold Down Type Seat, 3-seater Type)


    1. Install the No. 2 seat leg cover to the No. 3 seat leg sub-assembly.

  18. INSTALL REAR SEAT INNER BELT ASSEMBLY (for Fold Down Type Seat, 3-seater Type, w/ Seat Belt)


    1. A003IEX

      Install the rear seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  19. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY (for Fold Down Type Seat, 3-seater Type, w/ Seat Belt)


    1. A003H0N

      Install the rear seat lap type belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  20. INSTALL REAR SEAT CENTER INNER BELT ASSEMBLY (w/ Seat Belt)


    1. for Fixed Type Seat:


      1. for 2-leg Type:

        Click here

      2. for 3-leg Type:

        Click here

    2. for Fold Down Type Seat:


      1. for 3-seater Type:

        Click here

      2. for 4-seater Type:

        Click here

  21. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY


    1. Using hog ring pliers, install the No. 3 seat cushion cover sub-assembly to the No. 3 seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

      A003EA1E01
      Text in Illustration
      *A for 3-seater Type *B for 4-seater Type
      *1 Hog Ring Pliers - -

    2. Using hog ring pliers, install new hog rings.

      Note

      Be careful not to damage the cover.

      A003HJVE01
      Text in Illustration
      *A w/o Seat Belt *B w/ Seat Belt
      *C for 3-seater Type *D for 4-seater Type
      *1 Hog Ring Pliers - -

  22. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD


    1. for 3-seater Type:

      Attach the hooks to install the No. 3 seat cushion cover sub-assembly with pad.

    2. for 4-seater Type:

      Attach the hooks to install the No. 3 seat cushion cover sub-assembly with pad.

  23. INSTALL FRONT SEATBACK SHIELD LH (for Fold Down Type Seat, 3-seater Type)


    1. Attach the 2 hooks to install the front seatback shield LH.

  24. INSTALL FRONT SEATBACK SHIELD RH (for Fold Down Type Seat, 4-seater Type)


    1. Attach the 2 hooks to install the front seatback shield RH.

  25. INSTALL NO. 1 SEAT LAP TYPE BELT ASSEMBLY (w/ Seat Belt)


    1. for Fixed Type Seat:


      1. for 2-leg Type:

        Click here

      2. for 3-leg Type:

        Click here

    2. for Fold Down Type Seat:


      1. for 3-seater Type:

        Click here

      2. for 4-seater Type:

        Click here

  26. INSTALL REAR SEAT INNER BELT ASSEMBLY (w/ Seat Belt)


    1. for Fixed Type Seat:


      1. for 2-leg Type:

        Click here

      2. for 3-leg Type:

        Click here

    2. for Fold Down Type Seat:


      1. for 3-seater Type:

        Click here

      2. for 4-seater Type:

        Click here

  27. INSTALL REAR NO. 3 SEAT LEG SIDE COVER


    1. Install the rear No. 3 seat leg side cover.

  28. INSTALL REAR NO. 2 SEAT LEG SIDE COVER


    1. Install the rear No. 2 seat leg side cover.

  29. INSTALL REAR NO. 1 SEAT INNER CUSHION SHIELD LH (for Fold Down Type Seat, 4-seater Type)


    1. Install the rear No. 1 seat inner cushion shield LH with the screw.

  30. INSTALL RECLINING ADJUSTER COVER LH (for Fold Down Type Seat, 4-seater Type)


    1. Attach the 4 claws to install the reclining adjuster cover LH with the screw.

  31. INSTALL RECLINING ADJUSTER COVER LH (except Fold Down Type Seat, 4-seater Type)


    1. Install the reclining adjuster cover LH with the 2 screws.

  32. INSTALL RECLINING ADJUSTER COVER RH


    1. Install the reclining adjuster cover RH with the 2 screws.