REAR NO. 1 SEAT ASSEMBLY (w/ Headrest) REASSEMBLY


  1. INSTALL NO.1 SEATBACK SPRING ASSEMBLY

  2. INSTALL NO.1 SEATBACK PAD

  3. INSTALL NO.1 SEATBACK COVER SUB-ASSEMBLY


    1. A003GUJE01

      Using hog ring pliers, install the No.1 seatback cover sub-assembly with 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  4. INSTALL NO.1 SEATBACK COVER SUB-ASSEMBLY WITH PAD

  5. INSTALL REAR SEAT HEADREST SUPPORT

  6. INSTALL REAR SEAT HEADREST SUPPORT

  7. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY (w/ Assist Grip)

  8. INSTALL ASSIST GRIP (w/ Assist Grip)

  9. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 RH

  10. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 LH

  11. INSTALL REAR SEAT HEADREST ASSEMBLY

  12. INSTALL NO.1 SEAT LEG SUB-ASSEMBLY


    1. A003EG0

      Install the No.1 seat leg sub-assembly with the 4 bolts.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

  13. INSTALL NO.1 SEAT CUSHION PAD

  14. INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY


    1. A003HP2E01

      Using hog ring pliers, install the No.1 seat cushion cover sub-assembly with 8 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  15. INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD

  16. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly No.1)


    1. A003E55

      Install the seat lap type belt assembly No.1 with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  17. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)


    1. A003ID5

      Install the rear seat belt assembly inner with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  18. INSTALL REAR SEAT LEG SIDE COVER NO.4 (for Second Row)

  19. INSTALL REAR SEAT LEG SIDE COVER NO.5

  20. INSTALL RECLINING ADJUSTER COVER RH

  21. INSTALL RECLINING ADJUSTER COVER LH

  22. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO.1