REAR NO. 1 SEAT ASSEMBLY (for Fold Down Seat Type) REASSEMBLY


  1. INSTALL NO. 1 SEAT LEG SUB-ASSEMBLY


    1. A003HLW

      Install the No. 1 seat leg sub-assembly with the 4 bolts.

      Torque:
      55 N*m  { 561 kgf*cm, 41 ft.*lbf }

  2. INSTALL WARNING REFLECTOR HOLDER ASSEMBLY


    1. A003G2T

      Install the 4 warning reflector holder assemblies with the 4 screws.

  3. INSTALL REAR SEAT CUSHION UNDER COVER


    1. A003HXM

      Install the rear seat cushion under cover with the 11 screws.

  4. INSTALL SEAT TRACK ADJUSTING HANDLE KNOB


    1. A003C9N

      Install the seat track adjusting handle knob with the 2 screws.

  5. INSTALL NO. 1 SEAT REAR LEG SUB-ASSEMBLY

  6. INSTALL REAR SEAT CUSHION HINGE LOWER COVER

  7. INSTALL REAR SEAT LEG STOPPER

  8. INSTALL NO. 1 SEAT LEG STOPPER HOLDER

  9. INSTALL REAR NO. 1 SEAT LOCK ASSEMBLY


    1. A003BXV

      Install the 2 rear No. 1 seat lock assemblies with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  10. INSTALL REAR SEAT INNER BELT ASSEMBLY

    Tech Tips

    Follow the same procedure as for the fixed seat type.

  11. INSTALL REAR SEAT OUTER BELT ASSEMBLY

    Tech Tips

    Follow the same procedure as for the fixed seat type.

  12. INSTALL REAR SEAT LOCK ROD


    1. A003BZ8

      Install the rear seat lock rod with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  13. INSTALL REAR SEAT BACK LOCK COVER


    1. A003DNW

      Install the 2 rear seat back lock covers with the 4 screws.

  14. INSTALL RECLINING ADJUSTER RELEASE HANDLE


    1. A003ARH

      Install the 2 reclining adjuster release handles with the 2 screws.

  15. INSTALL NO. 1 SEAT LEG LOWER BRACKET


    1. A003D10

      Install the 2 No. 1 seat leg lower brackets with the 2 bolts.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

  16. INSTALL REAR SEAT LEG SIDE COVER


    1. A003FS1

      Install the 2 rear seat leg side covers with the 2 screws.

  17. INSTALL NO. 1 SEAT BACK SPRING ASSEMBLY


    1. A003HOR

      Install the No. 1 seat back spring assembly with the 4 bolts.

      Torque:
      55 N*m  { 561 kgf*cm, 41 ft.*lbf }

  18. INSTALL REAR SEAT NO. 1 RECLINING COVER LH


    1. A003H49

      Install the rear seat No. 1 reclining cover LH with the screw.

  19. INSTALL REAR SEAT NO. 1 RECLINING COVER RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  20. INSTALL REAR SEAT CUSHION NO. 1 SHIELD INNER LH


    1. A003HVT

      Engage the claw and install the rear seat cushion No. 1 shield inner LH.

    2. Install the screw.

  21. INSTALL REAR SEAT CUSHION NO. 1 SHIELD INNER RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  22. INSTALL NO. 1 SEAT BACK COVER SUB-ASSEMBLY


    1. A003F9LE01

      Using hog ring pliers, install the No. 1 seat back cover sub-assembly to the No. 1 seat back pad with 6 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  23. INSTALL NO. 1 SEAT BACK COVER WITH PAD SUB-ASSEMBLY


    1. Install the No. 1 seat back cover with pad sub-assembly.

    2. A003AI4

      Operate the reclining release handle sub-assembly and fold down the seat back onto the seat cushion.

    3. A003C3B

      Using hog ring pliers, install the No. 1 seat back cover with pad sub-assembly with 6 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    4. A003CUA

      Close the fastener of the No. 1 seat back cover sub-assembly.

    5. Operate the reclining release handle sub-assembly and return the seat back to the upright position.

  24. INSTALL REAR SEAT HEADREST SUPPORT


    1. A003CMME01

      Engage the 8 claws and install the 4 rear seat headrest supports.

  25. INSTALL REAR SEAT HEADREST ASSEMBLY


    1. A003H0OE02

      Push the lock button of the rear seat headrest support and install the rear seat headrest.

  26. INSTALL NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY


    1. A003BNEE01

      Using hog ring pliers, install the No. 1 seat cushion cover sub-assembly to the No. 1 seat cushion pad with 14 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  27. INSTALL NO. 1 SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY

  28. INSTALL REAR SEAT NO. 2 RECLINING COVER LH


    1. A003EV0

      Engage the 6 claws and install the rear seat No. 2 reclining cover LH.

  29. INSTALL REAR SEAT NO. 2 RECLINING COVER RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  30. INSTALL REAR SEAT BACK COVER LH


    1. A003D0N

      Install the rear seat back cover LH.

  31. INSTALL REAR SEAT BACK COVER RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  32. INSTALL RECLINING ADJUSTER COVER LH


    1. A003GAS

      Engage the claw and clip and install the reclining adjuster cover LH.

    2. Install the 2 screws.

  33. INSTALL RECLINING ADJUSTER COVER RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  34. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH


    1. A003HW4

      Engage the claw and install the No. 1 reclining adjuster release handle LH.

  35. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  36. INSTALL RECLINING RELEASE HANDLE SUB-ASSEMBLY


    1. A003I84

      Install the reclining release handle sub-assembly and the snap ring.