FUEL COOLER INSTALLATION


  1. INSTALL FUEL COOLER

    A003CENE03

    1. Install the fuel cooler with the 3 bolts.

      Torque:
      18 N*m  { 180 kgf*cm, 13 ft.*lbf }
    2. A003HI7E03

      Connect the 2 fuel hoses to the fuel cooler.

  2. INSPECT FOR FUEL LEAK


    1. Perform the Active Test.


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Engine and ECT / Active Test.

      5. Perform the Active Test.

        Tester Display Test Part Control Range Diagnostic Notes
        Test the Fuel Leak Pressurize common rail interior and check for fuel leaks Stop/Start

        • Fuel pressure inside common rail increased to specified value and engine speed increased to 2000 rpm when Active Test is performed

        • Above conditions preserved while Active Test is being performed