DRIVE BELT REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type)


    1. Perform the same procedure as above on the opposite side. Click here

  2. REMOVE FRONT SEAT ASSEMBLY RH (for Low-back Seat Type)


    1. Perform the same procedure as above on the opposite side. Click here

  3. REMOVE FRONT DOOR SCUFF PLATE RH

  4. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover sub-assembly.

  5. REMOVE FAN & GENERATOR V BELT


    1. A003GP7E01

      Use the hexagon-shaped part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the drive belt. Then remove the drive belt.

      Note

      When removing the drive belt, do not use the idle pulley's bolt.

      Tech Tips

      After removing the drive belt, move the tensioner upward to the maximum amount.

  6. REMOVE TENSIONER PULLEY

    Note

    Perform the following procedure when it is necessary to replace the tensioner pulley.


    1. A003CDX

      Remove the bolt, dust seal, tensioner pulley.