FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  2. REMOVE FRONT DOOR SCUFF PLATE RH

  3. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover sub-assembly.

  4. REMOVE NO. 1 ENGINE UNDER COVER


    1. Remove the 4 bolts and No. 1 engine under cover.

  5. REMOVE FAN AND GENERATOR V BELT


    1. A003GP7E01

      Use the hexagon-shaped part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the fan and generator V belt. Then remove the fan and generator V belt.

      Note

      When removing the fan and generator V belt, do not use the bolt of the idle pulley.

      Tech Tips

      After removing the fan and generator V belt, move the tensioner upward to the maximum amount.

  6. REMOVE CRANKSHAFT PULLEY


    1. A003C9BE03
      Text in Illustration
      *a Loosen
      *b Hold

      Using SST, hold the crankshaft pulley and loosen the pulley bolt until 2 or 3 threads are screwed into the crankshaft.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
    2. A003GABE04
      Text in Illustration
      *a Turn
      *b Hold

      Using SST and the pulley bolt, remove the crankshaft pulley and pulley bolt.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05010, 09954-05021 )

      Tech Tips

      Apply lubricant to the threads and end of SST.

  7. REMOVE FRONT CRANKSHAFT OIL SEAL


    1. A003B6DE02
      Text in Illustration
      *a Protective Tape
      *b Cut Position

      Using a screwdriver with its tip taped, pry out the front crankshaft oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.