ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

INSTALL INTAKE MANIFOLD

1. Install a new gasket onto the intake manifold.

2. 

   Text in Illustration

   *1	Intake Manifold Insulator
   *a	Line

   w/ Dual VVT-i:

   
   

   1. Install the intake manifold insulator to the intake manifold.

      Tech Tips

      Insert the protrusions of the intake manifold insulator into the grille of the intake manifold.

      Note

      

      Insert the intake manifold insulator until the position of the line as shown in the illustration.

3. Install the intake manifold with the 5 bolts and 2 nuts.

   Torque:

   25 N*m  { 255 kgf*cm, 18 ft.*lbf }

4. Install the bolt and wire harness bracket to the intake manifold.

   Torque:

   8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

5. Connect the vacuum hose to the intake manifold, and slide the clamp to secure the hose.

6. Connect the No. 3 PCV hose to the intake manifold, and slide the clamp to secure the hose.

7. Attach the 2 wire harness clamps to the wire harness bracket.

8. Connect the purge line hose to the vacuum switching valve, and slide the clamp to secure the hose.

9. Connect the vacuum switching valve connector.