ACCELERATOR PEDAL ROD ON-VEHICLE INSPECTION


  1. INSPECT ACCELERATOR PEDAL ROD ASSEMBLY


    1. Inspect the voltage.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Select the menu items: Powertrain / Engine and ECT / Data List / Accel Sensor Pos No. 1, Accel Sensor Pos No. 2.

      5. When depressing or releasing the accelerator pedal, check that the values of Accel Sensor Pos No. 1 and Accel Sensor Pos No. 2 are within the specification.

        Accel Sensor Pos No. 1 Standard Voltage
        Condition Specified Condition
        Accelerator pedal is released 0.5 to 1.1 V
        Accelerator pedal is depressed 2.6 to 4.5 V
        Accel Sensor Pos No. 2 Standard Voltage
        Condition Specified Condition
        Accelerator pedal is released 1.2 to 2.0 V
        Accelerator pedal is depressed 3.4 to 4.75 V

        If the result is not as specified, check the accelerator pedal rod assembly, wire harness and ECM.