CAMSHAFT OIL CONTROL VALVE INSTALLATION

for Exhaust Side:

1. Apply a light coat of engine oil to the a new O-ring, and install it to the camshaft timing oil control valve assembly.

   Note

   Do not damage the O-ring when installing.

   Tech Tips

   An O-ring is already installed in a new camshaft timing oil control valve assembly. So, the O-ring only needs to be coated with engine oil when the assembly is replaced with a new one.

2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

   Torque:

   9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

   Note

   
   

   • Replace with a new part if it is dropped or if it receives a strong impact.

   • Make sure that the O-ring is not cracked or jammed when installing.

3. Connect the camshaft timing oil control valve connector.