INTAKE AIR TEMPERATURE SENSOR INSPECTION


  1. INSPECT INTAKE AIR TEMPERATURE SENSOR


    1. A003F54E05

      Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance
      2.21 to 2.65 kΩ at 20°C (68°F)

      Note

      When checking the intake air temperature sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.

      If the result is not as specified, replace the sensor.

  2. INSPECT DIESEL TURBO INLET AIR TEMPERATURE SENSOR


    1. A003B4FE05

      Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance
      2.21 to 2.65 kΩ at 20°C (68°F)

      Note

      When checking the intake air temperature sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.

      If the result is not as specified, replace the sensor.