CRANKSHAFT POSITION SENSOR REMOVAL


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. A003AQV

      Remove the 4 bolts and crankshaft pulley cover from the crankshaft pulley.

    2. A003DQ3E01

      Using SST, hold the crankshaft pulley.

      SST
      09213-58014   ( 91551-80840 )
      09330-00021
    3. A003BG7

      Remove the 8 bolts, rear drive plate spacer, pump impeller drive plate and flywheel sub-assembly from the crankshaft.

  3. REMOVE REAR END PLATE


    1. A003FZC

      Remove the bolt and rear end plate from the cylinder block sub-assembly.

  4. REMOVE NO. 5 CYLINDER BLOCK INSULATOR


    1. A003AD4

      Remove the No. 5 cylinder block insulator from the cylinder block sub-assembly.

  5. REMOVE NO. 1 CYLINDER BLOCK INSULATOR


    1. A003I00

      Remove the No. 1 cylinder block insulator from the cylinder block sub-assembly.

  6. REMOVE CONNECTING WIRE

    A003F6H

    1. Disconnect the 2 connectors and clamp, and remove the connecting wire.

  7. REMOVE CRANKSHAFT POSITION SENSOR HARNESS BRACKET

    A003FPV

    1. Remove the bolt and crankshaft position sensor harness bracket from the cylinder block sub-assembly.

  8. REMOVE CRANKSHAFT POSITION SENSOR

    A003GG0

    1. Remove the bolt and crankshaft position sensor from the rear oil seal retainer.