| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Tensioner pulley x V-ribbed belt tensioner | 50 | 510 | 37 | |
| Engine service hole cover sub-assembly x Body | 13 | 133 | 10 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| camshaft timing gear assembly x Camshaft | 78 | 795 | 58 | |
| Camshaft bearing cap x Cylinder head | for bolt A | 12 | 122 | 9 |
| except bolt A | 16 | 158 | 11 | |
| Camshaft timing gear or sprocket x No. 2 camshaft | 78 | 795 | 58 | |
| Timing chain cover plug x Timing chain cover | 17 | 169 | 12 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Cylinder head x Cylinder block | 1st | 39 | 398 | 29 |
| 2nd | Turn 90 ° | |||
| 3rd | Turn 90 ° | |||
| No. 1 chain vibration damper x Cylinder head and cylinder block | 21 | 214 | 15 | |
| Chain tensioner slipper x Cylinder block | 21 | 214 | 15 | |
| No. 1 chain tensioner assembly x Cylinder head | 10 | 102 | 7 | |
| Timing chain guide x Cylinder head | 10 | 102 | 7 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Engine hanger x Cylinder head | 42 | 420 | 30 | |
| Engine oil level sensor x No. 2 oil pan sub-assembly | 7.0 | 71 | 52 in.*lbf | |
| Front No. 1 engine mounting bracket LH x Cylinder block | 51 | 520 | 38 | |
| Front No. 1 engine mounting bracket RH x Cylinder block | 51 | 520 | 38 | |
| Engine oil pressure switch assembly x Cylinder head | 15 | 153 | 11 | |
| V-ribbed belt tensioner assembly x Timing chain cover | for bolt 1 | 40 | 408 | 30 |
| for bolt 2 | 21 | 214 | 15 | |
| No. 1 idler pulley sub-assembly x Timing chain cover | 43 | 438 | 32 | |
| No. 1 compressor mounting bracket x Timing chain cover | for bolt B | 25 | 250 | 18 |
| except bolt B | 45 | 459 | 33 | |
| No. 1 water by-pass pipe x Cylinder head | 18 | 178 | 13 | |
| Fan pulley x Engine water pump assembly | 25 | 255 | 18 | |
| Exhaust manifold x Cylinder head | 36 | 367 | 27 | |
| Spark plug x Cylinder head | 18 | 184 | 13 | |
| Ignition coil assembly x Cylinder head cover | 9.0 | 92 | 80 in.*lbf | |
| PCV pipe x Cylinder head | 18 | 184 | 13 | |
| Front suspension crossmember sub-assembly x Front No. 1 engine mounting bracket | 55 | 561 | 41 | |
| Rear end plate x Cylinder block | 18 | 184 | 13 | |
| Drive plate and ring gear sub-assembly x Crankshaft | 74 | 755 | 55 | |
| Engine assembly with transmission x Body | for bolt A | 39 | 398 | 29 |
| for bolt B | 36 | 367 | 27 | |
| for bolt C | 150 | 1530 | 111 | |
| Rear engine mount x Body | 98 | 999 | 72 | |
| Compressor and magnetic clutch x No. 1 compressor mounting bracket | 25 | 250 | 18 | |
| Engine oil level dipstick guide x Front No. 1 engine mounting bracket LH | 20 | 204 | 15 | |
| Vane pump assembly x Timing chain cover | 21 | 214 | 15 | |
| No. 1 engine under cover x Body | 13 | 133 | 10 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Cylinder block water drain cock sub-assembly x Cylinder block | 25 | 250 | 18 | |
| water drain cock plug x Cylinder block water drain cock sub-assembly | 13 | 130 | 9 | |
| No. 1 oil nozzle sub-assembly x Cylinder block | 7.0 | 71 | 62 in.*lbf | |
| Crankshaft bearing cap x Cylinder block | 1st | 39 | 398 | 29 |
| 2nd | Turn 90° | |||
| Connecting rod cap x Connecting rod | 1st | 25 | 250 | 18 |
| 2nd | Turn 90° | |||
| No. 1 head straight screw plug x Cylinder head | 44 | 449 | 32 | |
| No. 2 head straight screw plug x Cylinder head | 90 | 918 | 66 | |
| Oil control valve filter with the screw plug x Cylinder head | 30 | 306 | 22 | |
| Oil filter bracket sub-assembly x Cylinder block | 27 | 275 | 20 | |
| Rear engine oil seal retainer x Cylinder block | 13 | 133 | 10 | |
| Oil jet x Cylinder block | 21 | 214 | 15 | |
| Oil pan sub-assembly x Cylinder block | 26 | 265 | 19 | |
| Oil strainer sub-assembly x Oil pan sub-assembly | 26 | 265 | 19 | |
| No. 2 oil pan sub-assembly x Oil pan sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Oil pan drain plug x No. 2 oil pan sub-assembly | 38 | 382 | 28 | |
| Crankshaft pulley x Crankshaft | 260 | 2650 | 192 | |
| Cylinder head cover sub-assembly x Cylinder head | 9.0 | 92 | 80 in.*lbf | |