COOLING FAN SWITCH INSPECTION


  1. INSPECT COOLING FAN SWITCH


    1. Partially immerse the cooling fan switch in water and warm up the water.

    2. Measure the resistance according to the value(s) in the table below.

      A003DUIE01
      Text in Illustration
      *a

      Component without harness connected

      (Cooling Fan Switch)

      		 *b Resistance
      *c Temperature *d Acceptable Range
      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 2.32 to 2.59 kΩ
      80°C (176°F) 0.310 to 0.326 kΩ

      CAUTION:


      • Do not put your hands in the water warmed up during the inspection.

      • Touching the hot water may result in burns.

      Note

      When checking the cooling fan switch in water, do not allow water to contact the terminals. After completing the check, dry the engine coolant temperature sensor.

      If the result is not as specified, replace the cooling fan switch.