WATER PUMP INSTALLATION


  1. INSTALL ENGINE WATER PUMP ASSEMBLY


    1. A003FGCE01

      Temporarily install a new gasket and the water pump assembly with the 8 bolts.

      Standard Length
      Item Specified Condition
      Bolt A 45 mm (1.77 in.)
      Bolt B 65 mm (2.56 in.)
      Text in Illustration
      A003DCD Bolt A
      A003GWQ Bolt B

    2. Tighten the 8 bolts in the order shown in the illustration.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

  2. CONNECT NO. 1 TURBO WATER HOSE


    1. Connect the No. 1 turbo water hose to the engine water pump assembly, and slide the clamp to secure the hose.

  3. INSTALL NO. 1 WATER BY-PASS PIPE


    1. A003G4LE01
      Text in Illustration
      *a Claw

      Install a new gasket to the No. 1 water by-pass pipe as shown in the illustration.

      Tech Tips

      Make sure that the claws of the gasket are facing the water by-pass pipe.

    2. Install the No. 1 water by-pass pipe to the engine water pump assembly with the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  4. INSTALL THERMOSTAT

    Click here