PCV VALVE INSTALLATION


  1. INSTALL VENTILATION VALVE SUB-ASSEMBLY


    1. A003GCDE03

      Apply a light coat of engine oil to the O-ring.

    2. Install the ventilation valve.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Tech Tips

      When reusing the ventilation valve, inspect the O-ring.

      If the O-ring has scratches or cuts, replace the ventilation valve.

    3. Connect the ventilation hose to the ventilation valve.

    4. Secure the hose with the clamp.

  2. INSTALL ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Install the engine service hole sub cover with the 5 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  3. INSTALL FRONT DOOR SCUFF PLATE RH

  4. INSTALL FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type)


    1. Perform the same procedure as above on the opposite side. Click here

  5. INSTALL FRONT SEAT ASSEMBLY RH (for Low-back Seat Type)


    1. Perform the same procedure as above on the opposite side. Click here