VACUUM SWITCHING VALVE REMOVAL


  1. REMOVE NO. 2 ENGINE SERVICE HOLE COVER (for Standard Body)


    1. Detach the clips and fold back the carpet.

    2. A003F0N

      Remove the 3 bolts and No. 2 engine service hole cover.

  2. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transmission)


    1. A003D9DE02

      Remove the 2 bolts and transmission oil filler tube sub-assembly.

    2. Remove the O-ring from the oil filler tube sub-assembly.

  3. REMOVE VACUUM SWITCHING VALVE ASSEMBLY


    1. A003F4V

      Disconnect the connector from the electric EGR control valve.

    2. Detach the clamp and wire harness.

    3. A003CLZ

      Disconnect the connector and vacuum hose from the vacuum switching valve.

    4. Remove the bolt and vacuum switching valve.