OUTER REAR VIEW MIRROR GLASS INSPECTION

PROCEDURE


  1. INSPECT OUTER MIRROR LH


    1. Check the mirror heater.


      1. A004RTSE02
        Text in Illustration
        *a

        Component without harness connected

        (Outer Mirror LH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 12.0 to 15.0 Ω

        If the result is not as specified, replace the outer mirror LH.

  2. INSPECT OUTER MIRROR RH


    1. Check the mirror heater.


      1. A004R4FE02
        Text in Illustration
        *a

        Component without harness connected

        (Outer Mirror RH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 12.0 to 15.0 Ω

        If the result is not as specified, replace the outer mirror RH.